Epoxy Resin Drop in Sinks

    Price: £97.50

    Available Options

    Epoxy Resin Drop in Sinks

    The sinks and troughs are manufactured from epoxy resin the material that offers a superb combination of features and benefits. It is durable, extremely chemical and stain resistant, mechanically strong and easily cleaned and decontaminated and exhibits good fire resistance, fire propagation and low smoke properties.

    Drop-in Sinks are designed to be easily fitted to any type of worktop material. The outside edge of the flange is finished square so that it can be fitted into a rebated cut out in a worktop. The top face of the flange is finished completely smooth. It can then be fitted flush with, or set slightly  below the surface of the worktop. The sink is self-supporting on this integral flange. No additional support is required. these sinks are particularly suitable for use with laminate worktops as the less chemically resistant core material is covered by the flange of the epoxy resin sink.

    Code

    Internal Length A

    Internal Width B

    Internal Depth C

    External Height D

    Flange Width E

    Flange Thickness F

    Waste C/L from side G

    Waste C/L from rear H

    Waste Position

    Internal Radius R

    Weight kg.

    Cut-out Size

    Rebate Size

    SGS2-DI

    256

    108

    150

    165

    22

    6

    128

    54

    Centre

    20

    2

    275 x 125

    26 rad.

    302 x 154

    41 rad. 7 deep

    SDS5-DI

    300

    200

    200

    213

    28.5

    8

    85

    100

    End

    30

    4

    337 x 237

    50 rad.

    359 x 259

    61 rad. 9 deep

    SA5-DI

    356

    254

    152

    166

    28.5

    6

    178

    127

    Centre

    30

    4

    403 x 301

    8 rad.

    415 x 313

    13 rad. 7 deep

    SS6-DI

    350

    300

    200

    215

    24.5

    9

    85

    150

    End

    30

    5

    379 x 329

    45 rad.

    401 x 351

    56 rad. 10 deep

    SN9-DI

    406

    305

    203

    216

    29.5

    6

    203

    152.5

    Centre

    30

    6

    454 x 352

    8 rad.

    467 x 364

    13 rad. 7 deep

    SM8-DI(W)

    450

    368

    130

    145

    29

    9

    225

    85

    Rear

    30

    5

    480 x 400

    50 rad.

    512 x 427

    61 rad. 10 deep

    SM8-DI

    450

    368

    195

    210

    30

    9

    225

    85

    Rear

    30

    7

    480 x 400

    50 rad.

    512 x 427

    61 rad. 10 deep

    SM8-DI(X)

    450

    368

    280

    295

    29

    9

    225

    85

    Rear

    30

    8

    480 x 400

    50 rad.

    512 x 427

    61 rad. 10 deep

    SGL10-DI

    400

    400

    300

    330

    27

    6

    200

    85

    Rear

    30

    9

    434 x 434

    50 rad.

    456 x 456

    61 rad. 7 deep

    SR12-DI

    550

    365

    250

    272

    32

    10

    275

    85

    Rear

    30

    9

    588 x 404

    50 rad.

    614 x 428

    61 rad. 10 deep

    SGR11-DI

    500

    400

    300

    312

    32

    10

    250

    100

    Rear

    30

    12

    538 x 438

    8 rad.

    564 x 464

    13 rad. 10 deep

    SEL16-DI

    600

    450

    300

    315

    30

    9

    300

    80

    Rear

    30

    12

    636 x 486

    48 rad.

    662 x 512

    61 rad. 10 deep

    SVL15-DI

    635

    381

    254

    270

    29

    6

    317.5

    190.5

    Centre

    30

    10

    681 x 427

    8 rad.

    695 x 441

    13 rad. 7 deep

     
    • Sink length and width dimensions given are nominal sizes only. There can be slight variations form sink to sink due to the nature of epoxy resin.
    • Outlet position assumes that the sink is oriented with the longer side facing the front of the worktop.
    • Sink weight will vary with colour. Weights shown are for Grey.
    • Simmons sinks are designed to accept a sink waste (73mm flange, 1½” BSP).
    • All dimensions in millimetres.
     
    Mechanical Properties

    Glass Transition Temperature (Tg) - 120 - 130 °C 
    Tensile strength - 85 N/mm²
    Tensile Modulus - 10,500 N/mm²
    Elongation at break - 0.8%
    Flexural strength - 112 N/mm²
    Flexural Modulus - 10,000 N/mm²
    Compressive Strength - 190 N/mm²
    Coefficient of linear thermal expansion - 34 10-6
    Water absorption-24 hours at 23°C - 5-10 mg (0.06-0.068%) ISO 62 (1980)

    Thermal Properties
    Thermal Shock - 2000 cycles (90 sec. at 75 °C, 90 sec. dwell, 90 sec. at 15°C) - No effect.
                               Should not be subjected to dry-ice or liquid nitrogen.

    Smoke Emission - Low Smoke Emission – BS 6853 1999 App. D Clause d.8.4. Result – Ao(on) 8.75, Ao(off) 10.41
    Flammability - Class 0 as classified by the current Building Regulations 
    Thermal Decomposition - 350° C

    Radioactive Thermal Decompsition
    Decontamination factor (geometric mean) - A5598
    Deviation factor - 1.25
    Ease of decontamination classification - “Excellent”

    Chemical Resistance
    Acetone - Unaffected 
    Acetonitrile - Unaffected
    Aqua regia - Unaffected
    Chloroform - Unaffected
    Chloroform 100% - Unaffected
    Chromic acid pickle (*1) - Unaffected
    Dichloromethane - Surface attack
    Dimethylformamide - Unaffected
    Ethyl acetate - Unaffected
    Hydrochloric acid 30% - Unaffected
    Hydrochloric acid concentrate - Unaffected
    Hydrofluoric acid 40% - Slight bleaching
    Hydrogen peroxide - Unaffected
    Methanol - Unaffected
    n-Butanol - Unaffected
    Nitric acid 70% - Very slight bleaching
    Nitric acic concentrated - Slight yellowing
    Nitric acid fuming - Attack and staining
    Perchloric acid 0.1% - Unaffected
    Phosphoric acid concentrated - Unaffected
    Potassium hydroxide pellet (*2) - Unaffected
    Sodium hypochlorite - Unaffected
    Sulphuric acid 70% - Unaffected
    Sulphuric acid concentrated - Surface attack
    Xylene - Unaffected

     

     

    Related Products